Scaler Data Management | ||
Scaler Main Page |
Table Name | Main Variable | Scale | Variables (units) | Primary Key | Submission File | Data Collection/Analysis Methods |
---|---|---|---|---|---|---|
CalibrateBaro | Barometric pressure | NA | Timestamp (yyyy-mm-dd hh:mm:ss) One column per sensor plus a column for NEON standard (=calibrated) |
Timestamp | NA | Section 3.4.1. |
CalibrateLight | Light | NA | Date (yyyy-mm-dd) Time (hh:mm:ss) | Date Time |
NA | Section 3.4.1. |
CalibrateTemp | Temperature | NA | Timestamp (yyyy-mm-dd hh:mm:ss) One column per sensor plus a column for NEON standard (=calibrated) |
Timestamp | NA | Section 3.4.1. |
CalibrateBaroSite | Barometric pressure | Biome (AND, ARC, AUS, CPC, CWT, KNZ, LUQ) | Timestamp (yyyy-mm-dd hh:mm:ss) One column per sensor |
Biome Timestamp |
AAA999999_CalibrateBaroSite | Section 3.4.1. |
CalibrateLightSite | Light | Biome (AND, ARC, AUS, CPC, CWT, KNZ, LUQ) | Date (yyyy-mm-dd)Time (hh:mm:ss) One column per sensor | Biome Date Time |
AAA999999_CalibrateLightSite | Section 3.4.1. |
CalibrateTempSite | Temperature | Biome (AND, ARC, AUS, CPC, CWT, KNZ, LUQ) | Timestamp (yyyy-mm-dd hh:mm:ss) One column per sensor |
Biome Timestamp |
AAA999999_CalibrateTempSite | Section 3.4.1. |
BOMS11 | Benthic organic matter | Patch: 1. Biome (AND, ARC, AUS, CPC, CWT, KNZ, LUQ) 2. Site type: E = Experimental 3. Site number: 1-6 4. Reach type: P = Patch 5. Patch number: 1-8 (2013 only) 6. Patch treatment: IN (consumers reduced), OUT (consumers ambient) |
BOM type (CBOM or FBOM) Date collected (yyyy-mm-dd) Dry mass (mgm-2) AFDM (mgm-2) Ashed mass (mgm-2)) |
Scale BOM type Date |
AAA999999_BOM_reach_patch | Sections 3.8.2., 3.8.4, 4.3., 4.6 |
BOMS12 | Benthic organic matter | Reach: 1. Biome (AND, ARC, AUS, CPC, CWT, KNZ, LUQ) 2. Site type: E = Experimental 3. Site number: 1-6 4. Reach type: P = Patch 5. Reach type: C = Control (consumers ambient), T = Treatment (consumers reduced); C or NA (2014) 6. Patch number: 1-8 (2013), 1-10 (2014) |
BOM type (CBOM or FBOM) Date collected (yyyy-mm-dd) Dry mass (mg m-2) AFDM (mg m-2) Ashed mass (mg m-2)) |
Scale BOM type Date |
AAA999999_BOM_reach_patch | Sections 3.8.2., 3.8.4, 4.3., 4.6 |
BOMS13 | Benthic organic matter | Synoptic: 1. Biome (AND, ARC, AUS, CPC, CWT, KNZ, LUQ) 2. Site type: S = Synoptic 3. Site number: 1-20 4. Transect: 1-10 |
BOM type (CBOM or FBOM) Date collected (yyyy-mm-dd) Dry mass (mg m-2) AFDM (mg m-2) Ashed mass (mg m-2)) |
Scale BOM type Date |
AAA999999_BOM_synoptic | Sections 3.6, 4.3. |
BOMSYN | Benthic organic matter | Method comparison (basket to synoptic): 1. Biome (AND, ARC, AUS, CPC, CWT, KNZ, LUQ) 2. Site type: E = Experimental 3. Site number: 1-6 4. Reach type: C = Control (consumers ambient) 5. Reference patch: 1-10 |
BOM type (CBOM or FBOM) Date collected (yyyy-mm-dd) Dry mass (mg m-2) AFDM (mg m-2) Ashed mass (mg m-2)) |
Scale BOM type Date |
AAA999999_BOM_reach_synstyle | Sections 3.6, 4.3. |
CHEM12 | Water chemistry | Reach: 1. Biome (AND, ARC, AUS, CPC, CWT, KNZ, LUQ) 2. Site type: E = Experimental 3. Site number: 1-6 4. Reach type: C = Control (consumers ambient), T = Treatment (consumers reduced); C or NA (2014) 5. Within reach location: TOP (= upstream/start of reach), BOT (= downstream/end of reach); NA (2014) |
Date (yyyy-mm-dd) Ammonium (μg N L-1) Detection limit (NH4-N) Nitrate (μg N L-1) Detection limit (NO3-N) Soluble Reactive Phosphorus (μg P L-1) Detection limit (SRP) Total Dissolved Nitrogen (μg N L-1) Detection limit (TDN) Total Dissolved Phosphorus (μg P L-1) Detection limit (TDP) Dissolved Organic Carbon (μg C L-1) Detection limit (DOC) Particulate Phosphorus (μg P L-1) Detection limit (PP) Particulate Nitrogen (μg N L-1) Detection limit (PN) Particulate Carbon (μg C L-1) Detection limit (PC) |
Scale Date |
AAA999999_BOM_waterchem_reach | Sections 3.3, 4.2. | CHEM13 | Water chemistry | Synoptic: 1. Biome (AND, ARC, AUS, CPC, CWT, KNZ, LUQ) 2. Site type: S = Synoptic 3. Site number: 1-20 |
Date (yyyy-mm-dd) Ammonium (μg N L-1) Detection limit (NH4-N) Nitrate (μg N L-1) Detection limit (NO3-N) Soluble Reactive Phosphorus (μg P L-1) Detection limit (SRP) Total Dissolved Nitrogen (μg N L-1) Detection limit (TDN) Total Dissolved Phosphorus (μg P L-1) Detection limit (TDP) Dissolved Organic Carbon (μg C L-1) Detection limit (DOC) Particulate Phosphorus (μg P L-1) Detection limit (PP) Particulate Nitrogen (μg N L-1) Detection limit (PN) Particulate Carbon (μg C L-1) Detection limit (PC) |
Scale Date |
AAA999999_BOM_waterchem_synoptic | Sections 3.3, 4.2. |
CONS21 | Invertebrates | Patch: 1. Biome (AND, ARC, AUS, CPC, CWT, KNZ, LUQ) 2. Site type: E = Experimental 3. Site number: 1-6 4. Reach type: P = Patch 5. Patch number: 1-8 (2013 only) 6. Patch treatment (i.e., ExclosureType): IN (consumers reduced), OUT (consumers ambient) |
Date (yyyy-mm-dd) SpeciesID Length (mm) Count |
Scale Date SpeciesID Length |
AAA999999_Inverts_reach_patch | Sections 3.8.4, 4.6. |
CONS22 | Invertebrates | Patch: 1. Biome (AND, ARC, AUS, CPC, CWT, KNZ, LUQ) 2. Site type: E = Experimental 3. Site number: 1-6 4. Reach type: C = Control (consumers ambient), T = Treatment (consumers reduced); C or NA (2014) 5. Patch number: 1-8 (2013 only) |
Date (yyyy-mm-dd) SpeciesID Length (mm) Count |
Scale Date SpeciesID Length |
AAA999999_Inverts_reach_patch | Sections 3.8.4, 4.6. |
CONS32 | Macro-consumers | Reach: 1. Biome (AND, ARC, AUS, CPC, CWT, KNZ, LUQ) 2. Site type: E = Experimental 3. Site number: 1-6 4. Reach type: C = Control (consumers ambient), T = Treatment (consumers reduced) |
Date (yyyy-mm-dd) Pass (text, unique to Biome) SpeciesID(ID, see Species Table) Length (mm) Count (if no value = 1) |
none | AAA999999_consumer_reach | Sections 3.2. |
CONS33 | Macro-consumers | Synoptic: 1. Biome (AND, ARC, AUS, CPC, CWT, KNZ, LUQ) 2. Site type: S = Synoptic 3. Site number: 1-20 |
Date (yyyy-mm-dd) Pass (text, unique to Biome) SpeciesID(ID, see Species Table) Length (mm) Count (if no value = 1) |
none | AAA999999_consumer_synoptic | Sections 3.2. |
METB11 | Oxygen | Patch: 1. Biome (AND, ARC, AUS, CPC, CWT, KNZ, LUQ) 2. Site type: E = Experimental 3. Site number: 1-6 4. Patch number: 1-8 (2013 only) 5. Patch treatment: IN (consumers reduced), OUT (consumers ambient); NA (2014) |
Timestamp (yyyy-mm-dd hh:mm:ss) Rate (ER = dark; NEP = light treatment) Dissolved oxygen (mg/L) Temperature (°C) Barometric pressure (kPa) Unit ID Folder (file name given during logging) |
none | AAA999999_consumer_synoptic | Sections 3.2. |
MET11_Blk | Oxygen | Calibration run without substrata: 1. Biome (AND, ARC, AUS, CPC, CWT, KNZ, LUQ) 2. Site type: E = Experimental 3. Replicatebr 4. Patch treatment |
Timestamp (yyyy-mm-dd hh:mm:ss) Rate (ER = dark; NEP = light treatment) Dissolved oxygen (mg/L) Temperature (°C) Barometric pressure (kPa) Unit ID Folder (file name given during logging) |
none | AAA999999_DO_patch_blk | Sections 3.8.1. |
METB11L | Oxygen | Test for linearity in oxygen changes: 1. Biome (AND, ARC, AUS, CPC, CWT, KNZ, LUQ) 2. Replicatebr /> |
Timestamp (yyyy-mm-dd hh:mm:ss) Rate (ER = dark treatment; NEP = light treatment, 1L, 2L, 3L, 4L, 5L = Layers of mesh) Dissolved oxygen (mg/L) Temperature (°C) Barometric pressure (kPa) Unit ID Folder (file name given during logging) |
Scale Timestamp |
AAA999999_DO_patch_linearitylight | Sections 3.8.1. |
METB12 | Oxygen | Reach: 1. Biome (AND, ARC, AUS, CPC, CWT, KNZ, LUQ) 2. Site type: E = Experimental 3. Site number: 1-6 4. Reach type: C = Control (consumers ambient), T = Treatment (consumers reduced); C or NA (2014) 5. Within reach location: TOP (= upstream/start of reach), BOT (= downstream/end of reach) |
Timestamp (yyyy-mm-dd hh:mm:ss) Rate (ER = dark; NEP = light treatment) Dissolved oxygen (mg/L) Temperature (°C) Barometric pressure (kPa) Unit ID |
Scale Timestamp |
AAA999999_DO_reach | Sections 3.4.2. |
METB12C | Oxygen | Calibration run before/after deployment (reach): 1. Biome (AND, ARC, AUS, CPC, CWT, KNZ, LUQ) 2. Site type: E = Experimental 3. Site number: 1-6 4. Reach type: C = Control (consumers ambient), T = Treatment (consumers reduced); C or NA (2014) 5. Within reach location: TOP (= upstream/start of reach), BOT (= downstream/end of reach) |
Timestamp (yyyy-mm-dd hh:mm:ss) Rate (ER = dark; NEP = light treatment) Dissolved oxygen (mg/L) Temperature (°C) Barometric pressure (kPa) Unit ID Folder (file name given during logging; CAL) |
Scale Timestamp |
AAA999999_DO_reach_cal | Sections 3.4.2. |
METB13 | Oxygen | Synoptic: 1. Biome (AND, ARC, AUS, CPC, CWT, KNZ, LUQ) 2. Site type: E = Experimental 3. Site number: 1-20 4. Within reach location: TOP (= upstream/start of reach), BOT (= downstream/end of reach); 2014 only |
Timestamp (yyyy-mm-dd hh:mm:ss) Rate (ER = dark; NEP = light treatment) Dissolved oxygen (mg/L) Temperature (°C) Barometric pressure (kPa) Unit ID Folder (file name given during logging; CAL) |
Scale Timestamp |
AAA999999_DO_synoptic; AAA999999_DO_synoptic(year2) |
Sections 3.4.2. |
METB13C | Oxygen | Calibration run before/after deployment (synoptic): 1. Biome (AND, ARC, AUS, CPC, CWT, KNZ, LUQ) 2. Site type: S = Synoptic 3. Site number: 1-20 4. Within reach location: TOP (= upstream/start of reach), BOT (= downstream/end of reach); 2014 only |
Timestamp (yyyy-mm-dd hh:mm:ss) Dissolved oxygen (mg/L) Temperature (°C) Barometric pressure (kPa) Unit ID Folder (file name given during logging; CAL) |
Scale Timestamp UnitID |
AAA999999_DO_synoptic_cal; AAA999999_DO_synoptic_cal(year2) |
Sections 3.4.2. |
METB21 | Light | Patch: 1. Biome (AND, ARC, AUS, CPC, CWT, KNZ, LUQ) 2. Site type: S = Synoptic 3. Site number: 1-6 4. Patch number: 1-8 (2013), 1-10 (2014) 5. Patch treatment: IN (consumers reduced), OUT (consumers ambient); NA (2014) |
Timestamp (yyyy-mm-dd hh:mm:ss) Dissolved oxygen (mg/L) Temperature (°C) Barometric pressure (kPa) Unit ID Folder (file name given during logging; CAL) |
Scale Timestamp |
AAA999999_Light_patch | Section 3.8.1. |
METB21L | Light | Test for linearity in oxygen changes: 1. Biome (AND, ARC, AUS, CPC, CWT, KNZ, LUQ) 2. Replicate |
Timestamp (yyyy-mm-dd hh:mm:ss) Lux (unitless) PAR (μE /cm2) Rate (ER = dark treatment; NEP = light treatment, 1L, 2L, 3L, 4L, 5L = Layers of mesh) Unit ID Calibration Date (yyyy-mm-dd) R2 (of lux to PAR conversion) Slope (of lux to PAR conversion) |
Scale Timestamp |
AAA999999_Light_patch_linearitylight | Section 3.8.1. |
METB22 | Light | Reach: 1. Biome (AND, ARC, AUS, CPC, CWT, KNZ, LUQ) 2. Site type: E = Experimental 3. Site number: 1-6 4. Reach type: C = Control (consumers ambient), T = Treatment (consumers reduced); C or NA (2014) 5. Within reach location: TOP (= upstream/start of reach), BOT (= downstream/end of reach) |
Timestamp (yyyy-mm-dd hh:mm:ss) Lux (unitless) PAR (μE /cm2) Rate (ER = dark treatment; NEP = light treatment, 1L, 2L, 3L, 4L, 5L = Layers of mesh) Unit ID Calibration Date (yyyy-mm-dd) R2 (of lux to PAR conversion) Slope (of lux to PAR conversion) |
Scale Timestamp |
AAA999999_Light_reach | Section 3.4.2. |
METB23 | Light | Synoptic: 1. Biome (AND, ARC, AUS, CPC, CWT, KNZ, LUQ) 2. Site type: S = Synoptic 3. Site number: 1-20 4. Within reach location: TOP (= upstream/start of reach), BOT (= downstream/end of reach); 2014 only |
Timestamp (yyyy-mm-dd hh:mm:ss) Lux (unitless) PAR (μE /cm2) Rate (ER = dark treatment; NEP = light treatment, 1L, 2L, 3L, 4L, 5L = Layers of mesh) Unit ID Calibration Date (yyyy-mm-dd) R2 (of lux to PAR conversion) Slope (of lux to PAR conversion) |
Scale Timestamp |
AAA999999_Light_synoptic AAA999999_Light_synoptic(year2) |
Section 3.4.2. |
METB32 | Travel time | Reach: 1. Biome (AND, ARC, AUS, CPC, CWT, KNZ, LUQ) 2. Site type: E = Experimental 3. Site number: 1-6 4. Reach type: C = Control (consumers ambient), T = Treatment (consumers reduced); C or NA (2014) |
Date (yyyy-mm-dd) Method (text; pulse or plateau) Travel time (min m-1) |
Scale Timestamp |
AAA999999_Light_synoptic AAA999999_Light_synoptic(year2) |
Section 3.4.2. |
METB33 | Travel time | Synoptic: 1. Biome (AND, ARC, AUS, CPC, CWT, KNZ, LUQ) 2. Site type: S = Synoptic 3. Site number: 1-20 |
Date (yyyy-mm-dd) Method (text; pulse or plateau) Travel time (min m-1) |
Scale Timestamp |
AAA999999_traveltime_synoptic | Sections 3.4.3., 4.1. |
METB42 | Discharge | Reach: 1. Biome (AND, ARC, AUS, CPC, CWT, KNZ, LUQ) 2. Site type: E = Experimental 3. Site number: 1-6 4. Reach type: C = Control (consumers ambient), T = Treatment (consumers reduced); C or NA (2014) |
Timestamp (yyyy-mm-dd hh:mm:ss) Specific conductance (Sp; μS cm-1)) NaCl concentration (mg L-1) Slope (Sp-NaCl conversion) Intercept (Sp-NaCl conversion) Relationship type (Sp-NaCl) NaCl added (g) Bromide conductance (mV) Br- concentration (mg L-1) Slope (mV-NaBr conversion) Intercept (mV-NaBr conversion) Relationship type (mV-NaCl) NaBr added (g) |
Scale Timestamp |
AAA999999_SlugDischarge_reach | Sections 3.1.6., 3.4.3. |
METB43 | Discharge | Synoptic: 1. Biome (AND, ARC, AUS, CPC, CWT, KNZ, LUQ) 2. Site type: S = Synoptic 3. Site number: 1-20 |
Timestamp (yyyy-mm-dd hh:mm:ss) Specific conductance (Sp; μS cm-1)) NaCl concentration (mg L-1) Slope (Sp-NaCl conversion) Intercept (Sp-NaCl conversion) Relationship type (Sp-NaCl) NaCl added (g) Bromide conductance (mV) Br- concentration (mg L-1) Slope (mV-NaBr conversion) Intercept (mV-NaBr conversion) Relationship type (mV-NaCl) NaBr added (g) |
Scale Timestamp |
AAA999999_SlugDischarge_synoptic | Sections 3.1.6., 3.4.3. |
METB52 | Aeration | Reach: 1. Biome (AND, ARC, AUS, CPC, CWT, KNZ, LUQ) 2. Site type: E = Experimental 3. Site number: 1-6 4. Reach type: C = Control (consumers ambient), T = Treatment (consumers reduced); C or NA (2014) |
Timestamp (yyyy-mm-dd hh:mm:ss) Specific conductance (Sp; μS cm-1)) NaCl concentration (mg L-1) Slope (Sp-NaCl conversion) Intercept (Sp-NaCl conversion) Relationship type (Sp-NaCl) NaCl added (g) Bromide conductance (mV) Br- concentration (mg L-1) Slope (mV-NaBr conversion) Intercept (mV-NaBr conversion) Relationship type (mV-NaCl) NaBr added (g) |
Scale Date Distance |
AAA999999_SF6plateau_reach | Sections 3.4.3., 4.1. |
METB53 | Aeration | Synoptic: 1. Biome (AND, ARC, AUS, CPC, CWT, KNZ, LUQ) 2. Site type: S = Synoptic 3. Site number: 1-20 |
Date (dd-MMM-YYY) Distance from injection site (m) Cl- concentration (mg L-1) Cl- stock solution (gL-1) Br- concentration (mg L-1) Br- stock solution (mg L-1) Rhodamine (fluorescence) Rhodamine stock solution (fluorescence) SF6 (peak area) SF6 stock solution (ml L-1) Pump rate (ml min-1) Temperature (°C) |
Scale Date Distance |
AAA999999_SF6plateau_synoptic | Sections 3.4.3., 4.1. |
NUTU11 | Nutrient uptake | Patch: 1. Biome (AND, ARC, AUS, CPC, CWT, KNZ, LUQ) 2. Site type: E = Experimentalbr /> 3. Site number: 1-20 4. Patch number: 1-8 (2013), 1-10 (2014) 5. Patch treatment: IN (consumers reduced), OUT (consumers ambient); NA (2014) |
Date (yyyy-mm-dd) Sampling time (hh:mm) Chamber volume Ammonium (μg N L-1) |
Scale Date Sampling time |
AAA999999_ammuntake_patch | Sections 3.8.1, 4.2. |
NUTU12 | Nutrient uptake | Reach: 1. Biome (AND, ARC, AUS, CPC, CWT, KNZ, LUQ) 2. Site type: E = Experimentalbr 3. Site number: 1-6 4. Reach type: C = Control (consumers ambient), T = Treatment (consumers reduced); C or NA (2014) |
Date (yyyy-mm-dd) Sampling time (hh:mm) Sample number (1-50) Ammonium (μg N L-1) Chloride tracer (mg Cl- L-1) Bromide tracer (mg Br- L-1) |
Scale Date Sampling time |
AAA999999_ammuntake_reach | Sections 3.5., 4.2. |
NUTU13 | Nutrient uptake | Synoptic: 1. Biome (AND, ARC, AUS, CPC, CWT, KNZ, LUQ) 2. Site type: S = Synoptic 3. Site number: 1-20 |
Date (yyyy-mm-dd) Sampling time (hh:mm) Sample number (1-50) Ammonium (μg N L-1) Chloride tracer (mg Cl- L-1) Bromide tracer (mg Br- L-1) |
none | AAA999999_ammuntake_synoptic | Sections 3.5., 4.2. |
PBIO11 | Producer biomass | Patch: 1. Biome (AND, ARC, AUS, CPC, CWT, KNZ, LUQ) 2. Site type: E = Experimentalbr /> 3. Site number: 1-6 4. Patch number: 1-8 (2013), 1-10 (2014) 5. Patch treatment: IN (consumers reduced), OUT (consumers ambient); NA (2014) |
Date collected (yyyy-mm-dd) Substrate area (cm-2) Chlorophyll a (mg m2 |
Scale Date |
AAA999999_Chla_reach_patch | Sections 3.8.2., 4.4. |
PBIO12 | Producer biomass | Reach: 1. Biome (AND, ARC, AUS, CPC, CWT, KNZ, LUQ) 2. Site type: E = Experimental 3. Site number: 1-6 4. Reach type: C = Control (consumers ambient), T = Treatment (consumers reduced); C or NA (2014) 5. Patch number: 1-8 (2013), 1-10 (2014) |
Date collected (yyyy-mm-dd) Substrate area (cm-2) Chlorophyll a (mg m2) |
Scale Date |
AAA999999_Chla_reach_patch | Sections 3.8.2., 4.4. |
PBIO13 | Producer biomass | Reach: 1. Biome (AND, ARC, AUS, CPC, CWT, KNZ, LUQ) 2. Site type: S = Synoptic 3. Site number: 1-20 4. Transect (unique to Biome) |
Date collected (yyyy-mm-dd) Substrate area (cm-2) Chlorophyll a (mg m2) |
Scale Date |
AAA999999_Chla_synoptic | Sections 3.6., 4.4. |
PBIOSYN | Producer biomass | Method comparison (basket to synoptic): 1. Biome (AND, ARC, AUS, CPC, CWT, KNZ, LUQ) 2. Site type: E = Experimental 3. Site number: 1-6 4. Reach type: C = Control (consumers ambient) 5. Reference patch: 1-10 |
Date collected (yyyy-mm-dd) Substrate area (cm-2) Chlorophyll a (mg m2) |
Scale Date |
AAA999999_Chla__reach_synstyle | Sections 3.6., 3.8.2., 4.4. |
SITE12 | Site characteristics | Reach: 1. Biome (AND, ARC, AUS, CPC, CWT, KNZ, LUQ) 2. Site type: E = Experimental 3. Site number: 1-6 4. Reach type: C = Control (consumers ambient), T = Treatment (consumers reduced); C or NA (2014) |
Longitude (degree decimal) Latitude (degree decimal) Coordinate system Reach length (m) Slope (degree) Number of transects Spacing of transects (m) |
Scale |
AAA999999_sitecharacteristics_reach | Sections 3.1.1., 3.1.7. |
SITE22 | Depth, Substrate | Reach: 1. Biome (AND, ARC, AUS, CPC, CWT, KNZ, LUQ) 2. Site type: E = Experimental 3. Site number: 1-6 4. Reach type: C = Control (consumers ambient), T = Treatment (consumers reduced); C or NA (2014) |
Date (yyyy-mm-dd) Transect (m) Substrate (mm) Depth (cm) |
Scale |
AAA999999_depthsubstrate_reach | Sections 3.1.2., 3.1.3. |
SITE23 | Depth, Substrate | Synoptic: 1. Biome (AND, ARC, AUS, CPC, CWT, KNZ, LUQ) 2. Site type: S = Synoptic 3. Site number: 1-20 |
Date (yyyy-mm-dd) Transect (m) Substrate (mm) Depth (cm) |
none | AAA999999_depthsubstrate_synoptic | Sections 3.1.2., 3.1.3. |
SITE32 | Canopy cover | Reach: 1. Biome (AND, ARC, AUS, CPC, CWT, KNZ, LUQ) 2. Site type: E = Experimental 3. Site number: 1-6 4. Reach type: C = Control (consumers ambient), T = Treatment (consumers reduced); C or NA (2014) |
Date (yyyy-mm-dd) Transect (m) CanopyN (points open 0-96) CanopyE (points open 0-96) CanopyS (points open 0-96) CanopyW (points open 0-96) |
Scale Date Transect |
AAA999999_canopy_reach | Sections 3.1.5. |
SITE33 | Canopy cover | Synoptic: 1. Biome (AND, ARC, AUS, CPC, CWT, KNZ, LUQ) 2. Site type: S = Synoptic 3. Site number: 1-20 |
Date (yyyy-mm-dd) Transect (m) CanopyN (points open 0-96) CanopyE (points open 0-96) CanopyS (points open 0-96) CanopyW (points open 0-96) |
Scale Date Transect |
AAA999999_canopy_synoptic | Sections 3.1.5. |
SITE42 | Discharge | Reach: 1. Biome (AND, ARC, AUS, CPC, CWT, KNZ, LUQ) 2. Site type: E = Experimental 3. Site number: 1-6 4. Reach type: C = Control (consumers ambient), T = Treatment (consumers reduced); C or NA (2014) |
Date (yyyy-mm-dd) Discharge (Q; m3 s-1) |
Scale Date Transect |
AAA999999_discharge_reach | Sections 3.1.6., 3.4.3. |
SITE43 | Discharge | Synoptic: 1. Biome (AND, ARC, AUS, CPC, CWT, KNZ, LUQ) 2. Site type: S = Synoptic 3. Site number: 1-20 |
Date (yyyy-mm-dd) Discharge (Q; m3 s-1) |
Scale Date |
AAA999999_discharge_synoptic | Sections 3.1.6., 3.4.3. |
SITE52 | Width | Reach: 1. Biome (AND, ARC, AUS, CPC, CWT, KNZ, LUQ) 2. Site type: E = Experimental 3. Site number: 1-6 4. Reach type: C = Control (consumers ambient), T = Treatment (consumers reduced); C or NA (2014) |
Date (yyyy-mm-dd) Width (m) |
none | AAA999999_widths_reach | Sections 3.1.2. |
SITE53 | Width | Synoptic: 1. Biome (AND, ARC, AUS, CPC, CWT, KNZ, LUQ) 2. Site type: S = Synoptic 3. Site number: 1-20 |
Date (yyyy-mm-dd) Width (m) |
none | AAA999999_widths_Synoptic | Sections 3.1.2. |
SlopeR2 | Light | Lux to PAR conversion | Unit ID (Probe#) Slope R2 |
none | N/A | Sections 3.4.1. |
Species | Macro-consumer species | NA | SpeciesID Biome (AND, ARC, AUS, CPC, CWT, KNZ, LUQ) Group (Fish, Amphibian, Crustacea) Family Genus Species Common name Trophic guild (Omnivore, Algivore, Insectivore, Carnivore) Position (Benthic, Water column) Intercept Slope Citation (for length to weight conversion) |
SpeciesID | AAA999999_Macroconsumer_species | Sections 3.2. |
InvertsSpecies | Invertebrate species | NA | SpeciesID Taxon Family Sub-falmily Genus Species Life stage (A=Adult, L=Larva, N=Nymph, P=Pupa, T=Terrestrial, LT=Terrestrial Larva, AT=Terrestrial Adult) FFG (CF=Collector-Filterer, CG=Collector-Gatherer, Ch?, FF=Filter-Feeder, Ominvore, P=Predator, Pa=Parasite, Ph=Piercer-Herbivor, Sc=Scraper, Sh=Shredder) a b Type (i.e., Power, Exp, Constant) Biomass type (mg) (DM=drymass (mg), DM μg = drymass (μg), AFDM=ash-free drymass) Source Biomass conversion (citation) |
SpeciesID | AAA999999_Inverts_species | Sections 3.2. |